machine description

→Full service as turnkey project from Maria Roboter :
Contents of feasibility / concept study
✓ Basic design data and conception - Block diagram (2D)
✓ Basic data determination for the preliminary mass/water balance
✓ Determination of energy consumption (electricity, water, other media)
✓ Proposal for water circuit
✓ Service evaluation for execution (assembly and erection, pipeline construction, electrical
installation, automation)
✓ List of other services
( ✓ Logistic concept
✓ Area concept
✓ Machinery list
✓ CAPEX calculation of all assets and services
✓ OPEX calculation of energy , labour, etc.
✓ Detailed economically evaluation and P&L Basic Engineering Delivery Contract Fig.:
calculation works →First project evaluation including CAPEX / OPEX and RoI is given
Main scope of the “Basic Engineering” services :
✓ Preliminary plant layout (3D)
✓ Preliminary flow diagram (P&ID) with quantity data
✓ Preliminary mass and water balance calculations as a basis for the overall plant design.
✓ El. power demand planning, as well as consumption lists of further media
✓ Concept elaboration of organic degradation of micro bacterial concentration in the process
water supply. ✓ Determination of the main design data of the individual aggregates
(specifications)
✓ Preliminary sectional drawings with heights Basic Engineering Approx. 3 months Delivery
Contract
✓ Preliminary space requirement
✓ Preliminary pump design
✓ Preliminary tank design
✓ Preliminary piping calculation
✓ Determination of electrical and automation issues
→Final proposal for delivery contract & preliminary project documentation
Main scope of the “Detail Engineering” services :
Basic Engineering Approx.
3 months (As Part of devlivery contract for finalization pf plannings)
✓ Final plant layout (3D)
✓ Final flow diagram (P&ID) with quantity data
✓ Finalization of mass and water balance calculations of all individual process steps
✓ Final demand planning of the media supply ✓ Finalization of the process water supply
✓ Detailed determination of the requirements of the individual aggregates (specifications)
✓ Final plant design

✓ Final space requirement ✓ Final pump design
✓ Final tank design ✓ Final piping and piping classes
✓ Final determination of the electrical and automation issues
✓ Control cabinet diagram incl. electrical wiring diagrams
✓ Functional description and CE conformity documentation Delivery Contract Fig.: Excerpt from
the 3D model →Final technical documentation for delivery phase
Scope of Delivery by Contract Basic Engineering
✓ Assets/machines (belong to PI&D and CAPEX overview)
✓ Chests, tanks, agitators, pumps and motors
✓ Pipes and valves
✓ Field Sensors
✓ Cabinets, MCCs, Cables
✓ Assembling of machinery
✓ Mechanical installation ✓ Electrical installation
✓ PLC & Visualization programming
✓ Transport and insurance
✓ Piping construction and installation
✓ Commissioning, Start up support and training
✓ Complete documentation and manuals incl. CE-Certificate
✓ Hazard analysis
✓ Spare parts
✓ Etc
Feel free to contact us if you are interested!: info@mariroboter.com

Dear,
We have pleasure to provide you with an offer about second-hand paper mill
that is
immediately for sale.
Qty. 1 Second-hand paper mill
Mfc.: VOITH, Emua-Valmet, Enertec, Honeywell, METSO, Bellmer,
Jagenberg
Built: 1931 Rebuilt: 1964, 1989, 1999, 2002, 2003, 2007, 2022
Stopped: 2024
The paper machine was built in 1931 to produce newsprint paper.
Basis weight: 36 gr/m2 - 100 gr/m2. Width after rewinder: 3.880
mm
Production speed: 1000 m/min. (up to 1100 m/min new parts from 2003).
Capacity: 90.000 T/annum 225 Tn/day (42 gr/m2)
Maximum steam running pressure 5 bar.
Rebuilt in 1989 in Press Section by EMUA-VALMET
Rebuilt in 1999 in Forming Section by VOITH and ENERTEC
Calander by VOITH and QCS by HONEYWELL MEASUREX
Rebuilt in 2003 in nearly all sections, approach system and machine, except
calander and
reeler (by METSO).
Reeller from 1964 by Voith upgraded in 2022 by Bellmer.
Winder nº1 from 2007 by Voith, and winder nº2 from 1999 by Jagenberg
Reel wrapper Twister from 1999 by Voith
Approach system: machine/mixing chest, radiscreen, cyclonic depuration (5
stages),
HC deculator, screening (3 stage), HC Fan Pump, LC screen and LC Fan Pump
Forming section with cantilever system. Fourdrinier bottom wire and top wire
with MB
suction unit
Top former type sym former by Metso 2002
Symflo D headbox with 69 dilution actuators. 420 l/s to 701 l/s Flow range
Press Section Twinver Press with separate 3rd press. Emua - Valmet year 2002
cantilever system

Composed by:
1st NIP suction press diameter 1.016 mm 2nd NIP SYM ROLL
diameter 1.200 mm
3rd NIP blend drilled
Dryer section composed by 35 dryer diameter 1.500 mm and press work 5 bars,
included
silent drive Santalo and complete close hood, steam condensate by Metso
Calendar ECOSOFT by Voith with 2 nips year 1998
Reeler by Voith and upgraded by Bellmer in 2022 with spools
Rewinder nº 1 Jagenberg VARIFLEX 45 year 1999 width 4.000 mm
Rewinder nº 2 Voith rewinder year 2009 Reel wrapper Voith
TWISTER year 1999
Sectional drive DC by Siemens type master drive year 2002
Spare rolls for each position
Please advise if further information is requested.
With best regards


For pricing information or more information, please contact us via the (Contact Us) button or via email:
info@mariroboter.com

Manufacturer Beloit
Machine type Twin wire with Bel Baie II forming zone
Paper grades Packaging Kraft paper, Fluting
Grammage 28 – 80 gsm
Working width 5400 mm
Machine speed 450 – 1000 m/min
Capacity 75.000 tpy (approx. 200 tpd)
Year of make 1988
Main Rebuilds • 1994 -> headbox and wire section replacement, modification in
1st and 2nd drying group, cal coil installation (caliper CD
profiling), tail threading installation
• 2001 -> all gearboxes replacement (speed over 1000 m/min)
• 2002 -> DCS, QCS and steam box installation
Scope of equipment • Complete PM from Approach flow to Slitter Rewinder
Raw material Wood pulp, virgin pulp, waste paper
Drive side from headbox
to pope reel

Right side

Spare parts Included as far as available
Condition Machine was in operation until 31.01.2024. It is in very good

condition; Video is available on demand

Location Europe


For pricing information or more information, please contact us via the (Contact Us) button or via email:
info@mariroboter.com

list price: 1700 EUR (in Germany additional 19% tax)

valid for all countries, additional packing and shipping, based on our Terms and Conditions of
Trade.
Moisture meter with digital display for measuring the absolute moisture content in waste paper
balls, also usable for measuring moisture un wooden chips, pelletsm sawdust, ...
rod measuring sensor with sharp top
capacitive measuring principle
digital alpha numeric display
storage for 500 measurement values
automatic zero point correction
calibrations for waste paper, pellets and wooden chips implemented
own calibrations can be done easly with teaching function
test and calibration measurements with optional test modul PE50R
To measure compressed waste paper, a hole must be drilled, then the sensor has to be pushed
into the hole in order to measure the moisture content.
Based on comparing measurements with the oven drying method customer specific calibrations
are possible.
Technical Data:
measuring range: 0 - 100%
resolution: 0,1%
measuring rate: 3 meas./sec
storage: 250 meas. values
dimmension: approx.180 x 80 x 30 mm (display unit)
additional Ø10 x 420 mm (measuring sensor)
weight:approx. 430 g
interface: USB
software:
DOSOFT
battery: standard alkaline 9V block battery
optional Extra:
1 snake drill Ø12 x 400 mm, price: 80 EUR (in Germany additional 19% tax)
DOWNLOADS:
info@mariroboter.com
request and order:info@mariroboter.com

list price: 900 EUR (in Germany additional 19% tax)
valid for all countries, additional packing and shipping, based on our Terms and Conditions of Trade.
Feuchtemessgerät DM4A
for wood, building materials, paper, cardboard, ...
non destructive - in seconds - only push and read
capacitive measuring principle
digital display
automatic zero point correction
regularely calibration measurements can be done with the optional test modules PE05 and PE30

fixed unchangable calibration curves for different materials are pre-programmed
Up to 10 different customer specific calibration curves can be stored
Also capable of measuring moisture in caravans, mobile homes, trailers,
or at plastic boats (osmose problematic).
We always strive to provide the best-tested products that add value to the paper industry.
Why is a moisture meter important for every paper mill?
At each stage of paper making, 90% of the moisture must be removed by gravity vacuum dewatering
pressing and thermal drying. Moisture should be measured at each step.
If the moisture detection is not correct, the quality of the paper will be inferior and waste will occur.
German hygrometer.
It has been tested and sold to many paper mills around the world.
Technical Data:
measuring range : 0 - 100%, adjustable
resolution: 0,1%
measuring depth: approx. 4 cm
damping: 0 - 99%, adjustable
storage: 100 measuring values
dimmension: approx.190 x 80 x 35 mm
weight: approx. 250 g
interface: USB
software: DOSOFT
battery: standard alkaline 9V block battery
DOWNLOADS:
info@mariroboter.com
request and order:info@mariroboter.com